Data and events

RETRIEVABLE DATA IN REAL TIME MODE

NameExplanation
eyeMoveUpInteger indicating eye movement towards up
0: None
1:Movement detection—Small
2:Movement detection—Medium
3:Reverse movement detection—Large
4:Reverse movement detection—Extra-large (FW 1.0.7 only)
eyeMoveDownInteger indicating eye movement towards down
0: None
1:Movement detection—Small
2:Movement detection—Medium
3:Reverse movement detection—Large
4:Reverse movement detection—Extra-large (FW 1.0.7 only)
eyeMoveLeftInteger indicating eye movement towards left
0: None
1:Movement detection—Small
2:Movement detection—Medium
3:Reverse movement detection—Large
4:Reverse movement detection—Extra-large (FW 1.0.7 only)
eyeMoveRightInteger indicating eye movement towards right
0: None
1:Movement detection—Small
2:Movement detection—Medium
3:Reverse movement detection—Large
4:Reverse movement detection—Extra-large (FW 1.0.7 only)
blinkSpeedBlinking speed (milliseconds)
blinkStrengthBlinking strength (Generally falls between 50 to 200.)
walkingSets the value to true if it detects that your heel hits the ground.
rollDegree showing roll element from the angle indicating posture
pitchDegree showing pitch element from the angle indicating posture
yawDegree showing yaw element from the angle indicating posture
accXValue of the X-axis of the accelerometer rate. 12 bit float value between -128 and 127 ( 8bit integer in FW1.0.7 )
accYValue of the Y-axis of the accelerometer rate. 12 bit float value between -128 and 127 ( 8bit integer in FW1.0.7 )
accZValue of the Z-axis of the accelerometer rate. 12 bit float value between -128 and 127 ( 8bit integer in FW1.0.7 )
noiseStatusBoolean value about whether the electrooculography sensors have noise or not.
fitErrorInteger indicating if JINS MEME is being worn correctly
0: No errors
1: Left nose-pad placement error
2: Right nose-pad placement error
3: Bridge electrode placement error
powerLeftInteger showing remaining battery
0: Charging battery
1: Low voltage
2:Lv2
3:Lv3
4:Lv4
5: Battery fully charged

EVENTS

Results of running commands to JINS MEME are provided through the MemeResponse class

EventsEvent Code
Commence data transmission (Real Time Mode)0x02
Terminate data transmission (Real Time Mode)0x04