Measurement flowAcademic

In order to use the functions of the JINS MEME ES_R, communication must be established between PC and the JINS MEME ES_R.

Connection

Connecting the Dongle (Windows only)

• Insert the dongle in any USB port on the PC.
  • Important If the dongle driver is not found, try the CP210x USB - UART bridge VCP driver provided by Silicon labs.

① Launch the app

1. Click the JINS MEME ACADEMIC icon and start the software.
   • The Acquire Data window appears.

② Dongle and port settings (Windows only)

• Click the Scan port button to search the dongle.
  • The combo box shows the port number of the USB.
• Select the destination port number from the list and click the Open button.
  • The Open button changes to the Close button and dongle communication is established.

③ Connecting with the JINS MEME ES_R

1. When a connectable JINS MEME ES_R is nearby, click the Scan device button will start scanning for a connectable JINS MEME ES_R.
2. The combo box shows the ID of the connectable JINS MEME ES_R.
3. Select the JINS MEME ES_R to connect to and click the Connect button.
4. The status text changes to the Connected and communication is established.
   • Connection may fail depending on the compatibility with the PC. If the connection fails, please try to connect again.

Measurement

1. Start measurement
   • Specify the Select mode, Transmission speed, Measurement range of Accelerometer, and Measurement range of Gyroscope, and click the Start Measurement button to send measurement values from the JINS MEME ES_R and start drawing graphs.
   • Tip Refer to "Review Data window" for the details of each item.
   • Important No graph is drawn when Quaternion is selected for Select mode.
2. Stopping Measurement
   • Click the Stop Measurement button while measuring to stop measurement.

Disconnection

1. Disconnecting Communication of the JINS MEME ES_R
   1. Click the Disconnect button while measurement with the JINS MEME ES_R is stopped.
   2. The Disconnect button changes to the Connect button and communication is disconnected.
2. Disconnecting Communication with the Dongle (Windows only)
   1. While dongle communication is established from any USB port, click the Close button.
   2. The Close button changes to the Open button and dongle communication is disconnected.